Black Nickel SECONDS!
When we sorted all the bins last week to find anodized needles, we came upon a trove of Black Nickel needles. These are seconds - the finish is silky smooth, but may have silver spots or just be lighter in color than we like. Or they are just the very last of a batch. They are fabulous needles at a fabulous price - a great way to try the Black Nickel needles!
Cables are sold separately.
Made in the USA
Coated Wire Cables
Strong, supple, and sized just right for our stainless steel connectors! The wire coated cables use the same connector as our formerclear cables and will fit our Darn Pretty™, Northern Light™ and Black Nickel needles and crochet hooks.
Cables are measured by the length between connectors. To calculate using a tip to tip measurement, deduct the total tip length (including connectors) from the total length you want your cable:
Examples:
Two 3.5 inch needle tips (and the connectors) total approx. 8 inches - for a 16 inch needle tip to tip, 16-8=8. A 24 inch needle tip to tip would be 24-8=16.
Two 5 inch needle tips (and the connectors) total approx. 11 inches - for a 32 inch needle tip to tip, 32-11=21. For a 40 inch tip to tip needle, 40-11=29.
NOTE - if you are a tight knitter, consider putting a smaller tip on the left side, and a larger tip - the size needed to make gauge - on the right. Knitting will flow much more smoothly this way!
Made in the USA
Custom Coated Wire Cables
Custom lengths are available in our coated wire cables up to 60 inches (if you need longer, please contact us.) The length you state will be the distance between the two connectors. Add approximately 8 inches for 3.5 inch tips and 11 for 5 inch tips to determine tip to tip length.
Made in the USA.
Needle Jumpers
Made in Vermont
Interchangeable Needle Case
Interchangeable needle cases crafted in our studio hold our 3.5 or 5 inch tips, with pockets for sizes US 3-10, as well as cable and stop pockets too. Made from premium quilting cottons by designers such as Kaffe Fassett, Tula Pink, Makower UK, and Cotton and Steel. Each case is lined, padded inside and out, and stitched with love!
Please note: Monkey Wrench cases are a priced at $40, as they require significantly more fabric due to the fussy cutting needed to get that wonderful purple monkey front and center.
Made in Vermont
