Heavy Metal™ Coated Wire Cable
These wire cables will fit Heavy Metal™ needles only.
Strong, supple, and sized just right for our stainless steel connectors!
Cables are measured by the length between connectors. To calculate using a tip to tip measurement, deduct the total tip length (including connectors) from the total length you want your cable:
Examples:
Two 3.5 inch needle tips (and the connectors) total approx. 8 inches - for a 16 inch needle tip to tip, 16-8=8. A 24 inch needle tip to tip would be 24-8=16.
Two 5 inch needle tips (and the connectors) total approx. 11 inches - for a 32 inch needle tip to tip, 32-11=21. For a 40 inch tip to tip needle, 40-11=29.
NOTE - if you are a tight knitter, consider putting a smaller tip on the left side, and a larger tip - the size needed to make gauge - on the right. Knitting will flow much more smoothly this way!
**These cables are for our Heavy Metal™ needles only.**
Made in the USA
